Product Carousel Tabs
Bestsellers
Smartphones
-
Products, Diode Lasers, Single Bar Lasers
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
SKU: Single Bar Diode Lasers -
Products, Diode Lasers, Vertical Diode Lasers
Vertical Diode Lasers
Vertical diode laser assemblies, efficiently cooled with conduction or millimeter water channels cooling circuit. Our vertically structured packages are mounted with a Patented Solder-free Clamping™ technique that allows high cooling efficiency and large operation and storage temperature range. The Innovative Monocrom Clamping™ technology , designed and developed by Monocrom, eliminates the undesired “smile effect” and prolongs laser lifetime.
Choose between different architectures, number of laser bars per stack and tune the central wavelength to your needs. Full range of wavelength offered: 760 nm, 808nm, 880 nm, 915 nm, 940 nm, 976 nm, 1060 nm, 1470 nm, 1550 nm, 1940 nm.
SKU: Vertical Diode Lasers -
Horizontal Diode Laser Stacks, Diode Lasers, Products
Horizontal Diode Laser Arrays
Horizontal Diode Laser Arrays – Conducticon or water- cooled linear diode laser arrays operating in CW or QCW mode. Wavelength range starts at 640 nm up to 2200 nm. The stacks are mounted using a patented Solder-free Clamping™ own Technology that eliminates “smile effect”, enhances efficient cooling and extends laser useful life-time. Our patented Clamping™ technology is unique of its kind and is exclusively used in Monocrom diode laser packages.
The number of assembled stacks can be set according to clients’ needs. The stacks can be connected separately or in a series for individual or set control.
SKU: Horizontal Diode Laser Arrays -
Single Emitters, Diode Lasers, Products
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
SKU: Single Emitters
Laptops & Computers
-
Products, Diode Lasers, Single Bar Lasers
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
SKU: Single Bar Diode Lasers -
Products, Diode Lasers, Vertical Diode Lasers
Vertical Diode Lasers
Vertical diode laser assemblies, efficiently cooled with conduction or millimeter water channels cooling circuit. Our vertically structured packages are mounted with a Patented Solder-free Clamping™ technique that allows high cooling efficiency and large operation and storage temperature range. The Innovative Monocrom Clamping™ technology , designed and developed by Monocrom, eliminates the undesired “smile effect” and prolongs laser lifetime.
Choose between different architectures, number of laser bars per stack and tune the central wavelength to your needs. Full range of wavelength offered: 760 nm, 808nm, 880 nm, 915 nm, 940 nm, 976 nm, 1060 nm, 1470 nm, 1550 nm, 1940 nm.
SKU: Vertical Diode Lasers -
Horizontal Diode Laser Stacks, Diode Lasers, Products
Horizontal Diode Laser Arrays
Horizontal Diode Laser Arrays – Conducticon or water- cooled linear diode laser arrays operating in CW or QCW mode. Wavelength range starts at 640 nm up to 2200 nm. The stacks are mounted using a patented Solder-free Clamping™ own Technology that eliminates “smile effect”, enhances efficient cooling and extends laser useful life-time. Our patented Clamping™ technology is unique of its kind and is exclusively used in Monocrom diode laser packages.
The number of assembled stacks can be set according to clients’ needs. The stacks can be connected separately or in a series for individual or set control.
SKU: Horizontal Diode Laser Arrays -
Single Emitters, Diode Lasers, Products
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
SKU: Single Emitters
Laptops & Computers
Smartphones
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
Vertical Diode Lasers
Vertical diode laser assemblies, efficiently cooled with conduction or millimeter water channels cooling circuit. Our vertically structured packages are mounted with a Patented Solder-free Clamping™ technique that allows high cooling efficiency and large operation and storage temperature range. The Innovative Monocrom Clamping™ technology , designed and developed by Monocrom, eliminates the undesired “smile effect” and prolongs laser lifetime.
Choose between different architectures, number of laser bars per stack and tune the central wavelength to your needs. Full range of wavelength offered: 760 nm, 808nm, 880 nm, 915 nm, 940 nm, 976 nm, 1060 nm, 1470 nm, 1550 nm, 1940 nm.
Horizontal Diode Laser Arrays
Horizontal Diode Laser Arrays – Conducticon or water- cooled linear diode laser arrays operating in CW or QCW mode. Wavelength range starts at 640 nm up to 2200 nm. The stacks are mounted using a patented Solder-free Clamping™ own Technology that eliminates “smile effect”, enhances efficient cooling and extends laser useful life-time. Our patented Clamping™ technology is unique of its kind and is exclusively used in Monocrom diode laser packages.
The number of assembled stacks can be set according to clients’ needs. The stacks can be connected separately or in a series for individual or set control.
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
Direct Diode Lasers
Direct diode lasers in a broad range of power levels and emission wavelengths designed for the most demanding industrial and medical applications that deliver up to 8 kW of power in continuous wave (CW).
Our diode laser stacks are mounted with Monocrom Solder-free laser bar Clamping™ technology, cooled efficiently, conductively or with real water macro channels for a low maintenance cost.
Our direct diode laser sources have matched the very demanding parameters of industrial applications such as heat-assisted roll-forming of ultra-high strength steel and bending of high strength steel in an industrial servo press for continuous die processing.
Fiber-coupled Lasers
Fiber-coupled Lasers
Highly efficient fiber coupled diode lasers with Monocrom Solder-free laser bar Clamping™ technology. The lack of a “smile” effect results in an optimum coupling efficiency to the optical fiber. We also provide wavelength stabilized fiber-coupled laser modules with a grating for wavelength locking. Having a low smile results in an exceptionally well-controlled feedback, which increases the locking efficiency and production repeatability.
For the most demanding applications of high brightness (radiance), we offer fiber-coupled high power diode laser systems capable of delivering 1 kW in power in continuous wave (CW) at a single wavelength.
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
Suitable for:
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
HiEN Puls x5400-YAG
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
HiEN Puls x5400-YLF
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
CW Pumping Source PH120 – PH300
CW Pumping Source PH120 – PH300
Pump heads for laser pumping, pumped with 120 W – 300 W at continuos wave (CW).
We offer all of them with Nd:YAG or Nd:YLF rod material.
The cylindrical symmetry of these pumping units allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system. The pumping laser diode bars are mounted using our patented solder-free clamping technology. Exclusively used by Monocrom.
QCW Pumping Source PH450-PH1800
Reliable laser pumping units that operate in quasi continous wave (QCW).
A cylindrical symmetry design allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology.
No mechanical stress Our patented solder-free technology is used in our diode bars stacks. Thanks to it clamped bars expand and contract freely during the thermal cicles of the pulsed regime avoiding mechanical stress.
QCW Pumping Source PH3600-PH5400
QCW Pumping Source PH3600-PH5400
QCW Pumping Source pumping source operates in quasi continous wave (QCW) mode.
It delivers excellent gain uniformity and lensing performance.
It includes its own capacitor bank and driver so the high current pulses are generated in the module itself, reducing the losses and complexity of the electrical setup and easing the control and synchronization of different gain modules by means of software.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology. Exclusively used by Monocrom.
Digital Laser Drivers
Digital Laser Drivers
DAE-20050 is a compact and powerful laser diode driver. Current waveforms can be CW, modulated or pulsed up to 200A.
This driver includes a 32bit communication port. Commands allow the full control of the driver features (pulse generation, current level, temperature limits, pulse’s counter…) while keeping a great amount of information thanks to all the voltage, photodiode, temperatures, delayed trigger for syncs…).
DAE-20050 has been designed to support high power laser applications. An internal water circuit is bases for high demanding a Block diagram μC with an USB 2.0 signals available (current level, embedded in the applications
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
TEC Laser Drivers
Recently Viewed
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Horizontal Diode Laser Arrays
Horizontal Diode Laser Arrays – Conducticon or water- cooled linear diode laser arrays operating in CW or QCW mode. Wavelength range starts at 640 nm up to 2200 nm. The stacks are mounted using a patented Solder-free Clamping™ own Technology that eliminates “smile effect”, enhances efficient cooling and extends laser useful life-time. Our patented Clamping™ technology is unique of its kind and is exclusively used in Monocrom diode laser packages.
The number of assembled stacks can be set according to clients’ needs. The stacks can be connected separately or in a series for individual or set control.
Digital Laser Drivers
Digital Laser Drivers
DAE-20050 is a compact and powerful laser diode driver. Current waveforms can be CW, modulated or pulsed up to 200A.
This driver includes a 32bit communication port. Commands allow the full control of the driver features (pulse generation, current level, temperature limits, pulse’s counter…) while keeping a great amount of information thanks to all the voltage, photodiode, temperatures, delayed trigger for syncs…).
DAE-20050 has been designed to support high power laser applications. An internal water circuit is bases for high demanding a Block diagram μC with an USB 2.0 signals available (current level, embedded in the applications
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.
Direct Diode Lasers
Direct diode lasers in a broad range of power levels and emission wavelengths designed for the most demanding industrial and medical applications that deliver up to 8 kW of power in continuous wave (CW).
Our diode laser stacks are mounted with Monocrom Solder-free laser bar Clamping™ technology, cooled efficiently, conductively or with real water macro channels for a low maintenance cost.
Our direct diode laser sources have matched the very demanding parameters of industrial applications such as heat-assisted roll-forming of ultra-high strength steel and bending of high strength steel in an industrial servo press for continuous die processing.
TEC Laser Drivers
Fiber-coupled Lasers
Fiber-coupled Lasers
Highly efficient fiber coupled diode lasers with Monocrom Solder-free laser bar Clamping™ technology. The lack of a “smile” effect results in an optimum coupling efficiency to the optical fiber. We also provide wavelength stabilized fiber-coupled laser modules with a grating for wavelength locking. Having a low smile results in an exceptionally well-controlled feedback, which increases the locking efficiency and production repeatability.
For the most demanding applications of high brightness (radiance), we offer fiber-coupled high power diode laser systems capable of delivering 1 kW in power in continuous wave (CW) at a single wavelength.
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
Suitable for:
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengths
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths