Today Deals
Bestsellers
-
Products, Diode Lasers, Direct Diode Lasers
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.SKU: Heatme -
Products, CiOM Series, Diode-Pumped Solid-State Lasers
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
MONOCROM offers solid state laser technology at CW or Pulsed, ultra-high energy or low energy, ultra-stable beam pointing or any combination of features required for scientific research.SKU: CiOM Series -
Fiber-coupled Lasers, LIOM Series, Products
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
SKU: LiOM Series -
Single Emitters, Diode Lasers, Products
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
SKU: Single Emitters with fixed focus -
Products, Fiber-coupled Lasers
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Electronically pulsed to a frequency that can exceed 1000 Hz, a value that is several times higher than the standard pulse rate in the market of 20-80 Hz, FLEX M-2000 Series opens the possibility for more diverse treatment strategies. The achieved maximum wall-plug efficiency is of about 5%, which is 4 times more compared to a Ho:YAG laser (1-2%). This laser source can be effectively operated in continuous wave (CW) and pulsed mode.Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
- M-2000 Series comes with a solder-free laser bar ClampingTM technology, insensitive to the CTE mismatch between the semiconductor and the electrodes, this exclusive technology is a guarantee for extended lifetime in hard pulsed applications.
- Integrated Rectified Polarization Beam Combining technique. Technology that is wavelength agnostic and allows to follow the moving gain of semiconductor laser diodes, which can be caused by injection current and p-n-junction temperature in- or decrease.
Indicated for
- Laser Lithotripsy
- Soft Tissue Surgery
- Treatment of Be
SKU: FLEX M-2000 X Series -
Diode Lasers, Liquid Fiber Diode Laser, Products
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beamPatented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
SKU: Liquid Fiber Diode Laser -
Diode Lasers, Encapsulated Diode Laser Stack with Tip, Products
Encapsulated Diode Laser Stack with Tip
Diode Lasers, Encapsulated Diode Laser Stack with Tip, ProductsEncapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.Laser Diode Modules without
Laser Diode Modules with tipDownload Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengthsSKU: Encapsulated Diode Laser Stack with Tip -
Diode Lasers, Encapsulated Diode Laser Stack without Tip, Products
Encapsulated Diode Laser Stack without Tip
Diode Lasers, Encapsulated Diode Laser Stack without Tip, ProductsEncapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.Laser Diode Modules without
Laser Diode Modules with tipDownload Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengthsSKU: Encapsulated Diode Laser Stack -
Products, Fiber-coupled Lasers
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Electronically pulsed to a frequency that can exceed 1000 Hz, a value that is several times higher than the standard pulse rate in the market of 20-80 Hz, FLEX M-2000 Series opens the possibility for more diverse treatment strategies. The achieved maximum wall-plug efficiency is of about 5%, which is 4 times more compared to a Ho:YAG laser (1-2%). This laser source can be effectively operated in continuous wave (CW) and pulsed mode.Broad variety of optical fiber core diameters are offered to best match application needs.
SKU: FLEX M-2000 Series
OFFICE WORKPLACE
PREPARE YOUR
Smartphones
-
Products, Diode Lasers, Direct Diode Lasers
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.SKU: Heatme -
Products, CiOM Series, Diode-Pumped Solid-State Lasers
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
MONOCROM offers solid state laser technology at CW or Pulsed, ultra-high energy or low energy, ultra-stable beam pointing or any combination of features required for scientific research.SKU: CiOM Series -
Fiber-coupled Lasers, LIOM Series, Products
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
SKU: LiOM Series -
Single Emitters, Diode Lasers, Products
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
SKU: Single Emitters with fixed focus -
Products, Fiber-coupled Lasers
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Electronically pulsed to a frequency that can exceed 1000 Hz, a value that is several times higher than the standard pulse rate in the market of 20-80 Hz, FLEX M-2000 Series opens the possibility for more diverse treatment strategies. The achieved maximum wall-plug efficiency is of about 5%, which is 4 times more compared to a Ho:YAG laser (1-2%). This laser source can be effectively operated in continuous wave (CW) and pulsed mode.Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
- M-2000 Series comes with a solder-free laser bar ClampingTM technology, insensitive to the CTE mismatch between the semiconductor and the electrodes, this exclusive technology is a guarantee for extended lifetime in hard pulsed applications.
- Integrated Rectified Polarization Beam Combining technique. Technology that is wavelength agnostic and allows to follow the moving gain of semiconductor laser diodes, which can be caused by injection current and p-n-junction temperature in- or decrease.
Indicated for
- Laser Lithotripsy
- Soft Tissue Surgery
- Treatment of Be
SKU: FLEX M-2000 X Series -
Diode Lasers, Liquid Fiber Diode Laser, Products
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beamPatented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
SKU: Liquid Fiber Diode Laser -
Diode Lasers, Encapsulated Diode Laser Stack with Tip, Products
Encapsulated Diode Laser Stack with Tip
Diode Lasers, Encapsulated Diode Laser Stack with Tip, ProductsEncapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.Laser Diode Modules without
Laser Diode Modules with tipDownload Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengthsSKU: Encapsulated Diode Laser Stack with Tip -
Diode Lasers, Encapsulated Diode Laser Stack without Tip, Products
Encapsulated Diode Laser Stack without Tip
Diode Lasers, Encapsulated Diode Laser Stack without Tip, ProductsEncapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.Laser Diode Modules without
Laser Diode Modules with tipDownload Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengthsSKU: Encapsulated Diode Laser Stack -
Products, Fiber-coupled Lasers
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Electronically pulsed to a frequency that can exceed 1000 Hz, a value that is several times higher than the standard pulse rate in the market of 20-80 Hz, FLEX M-2000 Series opens the possibility for more diverse treatment strategies. The achieved maximum wall-plug efficiency is of about 5%, which is 4 times more compared to a Ho:YAG laser (1-2%). This laser source can be effectively operated in continuous wave (CW) and pulsed mode.Broad variety of optical fiber core diameters are offered to best match application needs.
SKU: FLEX M-2000 Series
