Product Carousel Tabs
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
Suitable for:
CW Pumping Source PH120 – PH300
CW Pumping Source PH120 – PH300
Pump heads for laser pumping, pumped with 120 W – 300 W at continuos wave (CW).
We offer all of them with Nd:YAG or Nd:YLF rod material.
The cylindrical symmetry of these pumping units allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system. The pumping laser diode bars are mounted using our patented solder-free clamping technology. Exclusively used by Monocrom.
QCW Pumping Source PH450-PH1800
Reliable laser pumping units that operate in quasi continous wave (QCW).
A cylindrical symmetry design allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology.
No mechanical stress Our patented solder-free technology is used in our diode bars stacks. Thanks to it clamped bars expand and contract freely during the thermal cicles of the pulsed regime avoiding mechanical stress.
QCW Pumping Source PH3600-PH5400
QCW Pumping Source PH3600-PH5400
QCW Pumping Source pumping source operates in quasi continous wave (QCW) mode.
It delivers excellent gain uniformity and lensing performance.
It includes its own capacitor bank and driver so the high current pulses are generated in the module itself, reducing the losses and complexity of the electrical setup and easing the control and synchronization of different gain modules by means of software.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology. Exclusively used by Monocrom.
Digital Laser Drivers
Digital Laser Drivers
DAE-20050 is a compact and powerful laser diode driver. Current waveforms can be CW, modulated or pulsed up to 200A.
This driver includes a 32bit communication port. Commands allow the full control of the driver features (pulse generation, current level, temperature limits, pulse’s counter…) while keeping a great amount of information thanks to all the voltage, photodiode, temperatures, delayed trigger for syncs…).
DAE-20050 has been designed to support high power laser applications. An internal water circuit is bases for high demanding a Block diagram μC with an USB 2.0 signals available (current level, embedded in the applications
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
TEC Laser Drivers
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths
HiEN Puls x5400-YAG
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
HiEN Puls x5400-YLF
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beam
Patented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
CW Pumping Source PH120 – PH300
CW Pumping Source PH120 – PH300
Pump heads for laser pumping, pumped with 120 W – 300 W at continuos wave (CW).
We offer all of them with Nd:YAG or Nd:YLF rod material.
The cylindrical symmetry of these pumping units allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system. The pumping laser diode bars are mounted using our patented solder-free clamping technology. Exclusively used by Monocrom.
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
Indicated for
QCW Pumping Source PH450-PH1800
Reliable laser pumping units that operate in quasi continous wave (QCW).
A cylindrical symmetry design allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology.
No mechanical stress Our patented solder-free technology is used in our diode bars stacks. Thanks to it clamped bars expand and contract freely during the thermal cicles of the pulsed regime avoiding mechanical stress.
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
Vertical Diode Lasers
Vertical diode laser assemblies, efficiently cooled with conduction or millimeter water channels cooling circuit. Our vertically structured packages are mounted with a Patented Solder-free Clamping™ technique that allows high cooling efficiency and large operation and storage temperature range. The Innovative Monocrom Clamping™ technology , designed and developed by Monocrom, eliminates the undesired “smile effect” and prolongs laser lifetime.
Choose between different architectures, number of laser bars per stack and tune the central wavelength to your needs. Full range of wavelength offered: 760 nm, 808nm, 880 nm, 915 nm, 940 nm, 976 nm, 1060 nm, 1470 nm, 1550 nm, 1940 nm.
QCW Pumping Source PH3600-PH5400
QCW Pumping Source PH3600-PH5400
QCW Pumping Source pumping source operates in quasi continous wave (QCW) mode.
It delivers excellent gain uniformity and lensing performance.
It includes its own capacitor bank and driver so the high current pulses are generated in the module itself, reducing the losses and complexity of the electrical setup and easing the control and synchronization of different gain modules by means of software.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology. Exclusively used by Monocrom.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Horizontal Diode Laser Arrays
Horizontal Diode Laser Arrays – Conducticon or water- cooled linear diode laser arrays operating in CW or QCW mode. Wavelength range starts at 640 nm up to 2200 nm. The stacks are mounted using a patented Solder-free Clamping™ own Technology that eliminates “smile effect”, enhances efficient cooling and extends laser useful life-time. Our patented Clamping™ technology is unique of its kind and is exclusively used in Monocrom diode laser packages.
The number of assembled stacks can be set according to clients’ needs. The stacks can be connected separately or in a series for individual or set control.
Digital Laser Drivers
Digital Laser Drivers
DAE-20050 is a compact and powerful laser diode driver. Current waveforms can be CW, modulated or pulsed up to 200A.
This driver includes a 32bit communication port. Commands allow the full control of the driver features (pulse generation, current level, temperature limits, pulse’s counter…) while keeping a great amount of information thanks to all the voltage, photodiode, temperatures, delayed trigger for syncs…).
DAE-20050 has been designed to support high power laser applications. An internal water circuit is bases for high demanding a Block diagram μC with an USB 2.0 signals available (current level, embedded in the applications
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
Week Deals limited, Just now
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
Vertical Diode Lasers
Vertical diode laser assemblies, efficiently cooled with conduction or millimeter water channels cooling circuit. Our vertically structured packages are mounted with a Patented Solder-free Clamping™ technique that allows high cooling efficiency and large operation and storage temperature range. The Innovative Monocrom Clamping™ technology , designed and developed by Monocrom, eliminates the undesired “smile effect” and prolongs laser lifetime.
Choose between different architectures, number of laser bars per stack and tune the central wavelength to your needs. Full range of wavelength offered: 760 nm, 808nm, 880 nm, 915 nm, 940 nm, 976 nm, 1060 nm, 1470 nm, 1550 nm, 1940 nm.
Horizontal Diode Laser Arrays
Horizontal Diode Laser Arrays – Conducticon or water- cooled linear diode laser arrays operating in CW or QCW mode. Wavelength range starts at 640 nm up to 2200 nm. The stacks are mounted using a patented Solder-free Clamping™ own Technology that eliminates “smile effect”, enhances efficient cooling and extends laser useful life-time. Our patented Clamping™ technology is unique of its kind and is exclusively used in Monocrom diode laser packages.
The number of assembled stacks can be set according to clients’ needs. The stacks can be connected separately or in a series for individual or set control.
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
Direct Diode Lasers
Direct diode lasers in a broad range of power levels and emission wavelengths designed for the most demanding industrial and medical applications that deliver up to 8 kW of power in continuous wave (CW).
Our diode laser stacks are mounted with Monocrom Solder-free laser bar Clamping™ technology, cooled efficiently, conductively or with real water macro channels for a low maintenance cost.
Our direct diode laser sources have matched the very demanding parameters of industrial applications such as heat-assisted roll-forming of ultra-high strength steel and bending of high strength steel in an industrial servo press for continuous die processing.
Fiber-coupled Lasers
Fiber-coupled Lasers
Highly efficient fiber coupled diode lasers with Monocrom Solder-free laser bar Clamping™ technology. The lack of a “smile” effect results in an optimum coupling efficiency to the optical fiber. We also provide wavelength stabilized fiber-coupled laser modules with a grating for wavelength locking. Having a low smile results in an exceptionally well-controlled feedback, which increases the locking efficiency and production repeatability.
For the most demanding applications of high brightness (radiance), we offer fiber-coupled high power diode laser systems capable of delivering 1 kW in power in continuous wave (CW) at a single wavelength.
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
Suitable for:
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
HiEN Puls x5400-YAG
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
HiEN Puls x5400-YLF
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
CW Pumping Source PH120 – PH300
CW Pumping Source PH120 – PH300
Pump heads for laser pumping, pumped with 120 W – 300 W at continuos wave (CW).
We offer all of them with Nd:YAG or Nd:YLF rod material.
The cylindrical symmetry of these pumping units allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system. The pumping laser diode bars are mounted using our patented solder-free clamping technology. Exclusively used by Monocrom.
QCW Pumping Source PH450-PH1800
Reliable laser pumping units that operate in quasi continous wave (QCW).
A cylindrical symmetry design allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology.
No mechanical stress Our patented solder-free technology is used in our diode bars stacks. Thanks to it clamped bars expand and contract freely during the thermal cicles of the pulsed regime avoiding mechanical stress.
Smartphones & Tablets
-
Products, Diode Lasers, Single Bar Lasers
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
SKU: Single Bar Diode Lasers -
Products, Laser Electronics
TEC Laser Drivers
- Compact design
- Bidirectional TEC Control
- Switching technology: high efficient driver
- NTC resistor as a temperature sensor
- PID for precise temperature control (0,01º C)
- Security stop when the sensor is open/shorted
- External shutdown control 2,5 V
- Reference voltage output
- Current soft-start for controlled start-up
- Visible running by LED
SKU: TEC Laser Drivers -
Fiber-coupled Lasers, Diode Lasers, Products
Fiber-coupled Lasers
Fiber-coupled Lasers
Highly efficient fiber coupled diode lasers with Monocrom Solder-free laser bar Clamping™ technology. The lack of a “smile” effect results in an optimum coupling efficiency to the optical fiber. We also provide wavelength stabilized fiber-coupled laser modules with a grating for wavelength locking. Having a low smile results in an exceptionally well-controlled feedback, which increases the locking efficiency and production repeatability.
For the most demanding applications of high brightness (radiance), we offer fiber-coupled high power diode laser systems capable of delivering 1 kW in power in continuous wave (CW) at a single wavelength.
SKU: Fiber-coupled Lasers -
Products, Fiber-coupled Lasers
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Electronically pulsed to a frequency that can exceed 1000 Hz, a value that is several times higher than the standard pulse rate in the market of 20-80 Hz, FLEX M-2000 Series opens the possibility for more diverse treatment strategies. The achieved maximum wall-plug efficiency is of about 5%, which is 4 times more compared to a Ho:YAG laser (1-2%). This laser source can be effectively operated in continuous wave (CW) and pulsed mode.Broad variety of optical fiber core diameters are offered to best match application needs.
SKU: FLEX M-2000 Series -
Products, Diode-Pumped Solid-State Lasers
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
- Diode-pumped solid state laser for retina regeneration
- Wavelength: 527 nm
- Short laser pulses of 1.7 ms with up to 1 mJ
Suitable for:
- Material processing
- LIBS/RAMAR Spectroscopy
- LIDAR & WIND LIDAR
SKU: LQ-527-12 -
Diode Lasers, Encapsulated Diode Laser Stack without Tip, Products
Encapsulated Diode Laser Stack without Tip
Diode Lasers, Encapsulated Diode Laser Stack without Tip, ProductsEncapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.Laser Diode Modules without
Laser Diode Modules with tipDownload Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengthsSKU: Encapsulated Diode Laser Stack -
Products, Diode-Pumped Solid-State Lasers, Pumping Sources
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
- diode-pumped solid state green laser
- wavelength: 532 nm
- peak power at CW: up to 8W
- peak power at QCW: up to 15W
- beam quality: M²<1.4
- Power on demand
- Multi-path® technology
- Low cooling requirements
SKU: MP 532 -
Diode Lasers, Encapsulated Diode Laser Stack with Tip, Products
Encapsulated Diode Laser Stack with Tip
Diode Lasers, Encapsulated Diode Laser Stack with Tip, ProductsEncapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.Laser Diode Modules without
Laser Diode Modules with tipDownload Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengthsSKU: Encapsulated Diode Laser Stack with Tip
Music Headphones
-
Products, Diode Lasers, Single Bar Lasers
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
SKU: Single Bar Diode Lasers -
Products, Diode Lasers, Vertical Diode Lasers
Vertical Diode Lasers
Vertical diode laser assemblies, efficiently cooled with conduction or millimeter water channels cooling circuit. Our vertically structured packages are mounted with a Patented Solder-free Clamping™ technique that allows high cooling efficiency and large operation and storage temperature range. The Innovative Monocrom Clamping™ technology , designed and developed by Monocrom, eliminates the undesired “smile effect” and prolongs laser lifetime.
Choose between different architectures, number of laser bars per stack and tune the central wavelength to your needs. Full range of wavelength offered: 760 nm, 808nm, 880 nm, 915 nm, 940 nm, 976 nm, 1060 nm, 1470 nm, 1550 nm, 1940 nm.
SKU: Vertical Diode Lasers -
Horizontal Diode Laser Stacks, Diode Lasers, Products
Horizontal Diode Laser Arrays
Horizontal Diode Laser Arrays – Conducticon or water- cooled linear diode laser arrays operating in CW or QCW mode. Wavelength range starts at 640 nm up to 2200 nm. The stacks are mounted using a patented Solder-free Clamping™ own Technology that eliminates “smile effect”, enhances efficient cooling and extends laser useful life-time. Our patented Clamping™ technology is unique of its kind and is exclusively used in Monocrom diode laser packages.
The number of assembled stacks can be set according to clients’ needs. The stacks can be connected separately or in a series for individual or set control.
SKU: Horizontal Diode Laser Arrays -
Single Emitters, Diode Lasers, Products
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
SKU: Single Emitters -
Products, Diode Lasers, Direct Diode Lasers
Direct Diode Lasers
Direct diode lasers in a broad range of power levels and emission wavelengths designed for the most demanding industrial and medical applications that deliver up to 8 kW of power in continuous wave (CW).
Our diode laser stacks are mounted with Monocrom Solder-free laser bar Clamping™ technology, cooled efficiently, conductively or with real water macro channels for a low maintenance cost.
Our direct diode laser sources have matched the very demanding parameters of industrial applications such as heat-assisted roll-forming of ultra-high strength steel and bending of high strength steel in an industrial servo press for continuous die processing.
SKU: Direct Diode Lasers -
Fiber-coupled Lasers, Diode Lasers, Products
Fiber-coupled Lasers
Fiber-coupled Lasers
Highly efficient fiber coupled diode lasers with Monocrom Solder-free laser bar Clamping™ technology. The lack of a “smile” effect results in an optimum coupling efficiency to the optical fiber. We also provide wavelength stabilized fiber-coupled laser modules with a grating for wavelength locking. Having a low smile results in an exceptionally well-controlled feedback, which increases the locking efficiency and production repeatability.
For the most demanding applications of high brightness (radiance), we offer fiber-coupled high power diode laser systems capable of delivering 1 kW in power in continuous wave (CW) at a single wavelength.
SKU: Fiber-coupled Lasers -
Products, Diode-Pumped Solid-State Lasers
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
- Diode-pumped solid state laser for retina regeneration
- Wavelength: 527 nm
- Short laser pulses of 1.7 ms with up to 1 mJ
Suitable for:
- Material processing
- LIBS/RAMAR Spectroscopy
- LIDAR & WIND LIDAR
SKU: LQ-527-12 -
Products, Diode-Pumped Solid-State Lasers, Pumping Sources
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
- diode-pumped solid state green laser
- wavelength: 532 nm
- peak power at CW: up to 8W
- peak power at QCW: up to 15W
- beam quality: M²<1.4
- Power on demand
- Multi-path® technology
- Low cooling requirements
SKU: MP 532
Top Categories this Week
Laptops & Computers
Home Enternteinment
-
Products, Diode Lasers, Single Bar Lasers
Single Bar Diode Lasers
Single Bar Diode Lasers
Laser diode packages for a single laser bar with conduction or water macro-channels cooling with great heat dissipation and an unprecedent low smile.
Our single bar diode laser mounts are clamped with Monocrom Solder-free laser bar Clamping™ Technique that improves overall performance and prolongs laser diode life-time.
There is an option to add a variety of optics assemblies to collimate both optical axes.
SKU: Single Bar Diode Lasers -
Products, Diode Lasers, Vertical Diode Lasers
Vertical Diode Lasers
Vertical diode laser assemblies, efficiently cooled with conduction or millimeter water channels cooling circuit. Our vertically structured packages are mounted with a Patented Solder-free Clamping™ technique that allows high cooling efficiency and large operation and storage temperature range. The Innovative Monocrom Clamping™ technology , designed and developed by Monocrom, eliminates the undesired “smile effect” and prolongs laser lifetime.
Choose between different architectures, number of laser bars per stack and tune the central wavelength to your needs. Full range of wavelength offered: 760 nm, 808nm, 880 nm, 915 nm, 940 nm, 976 nm, 1060 nm, 1470 nm, 1550 nm, 1940 nm.
SKU: Vertical Diode Lasers -
Horizontal Diode Laser Stacks, Diode Lasers, Products
Horizontal Diode Laser Arrays
Horizontal Diode Laser Arrays – Conducticon or water- cooled linear diode laser arrays operating in CW or QCW mode. Wavelength range starts at 640 nm up to 2200 nm. The stacks are mounted using a patented Solder-free Clamping™ own Technology that eliminates “smile effect”, enhances efficient cooling and extends laser useful life-time. Our patented Clamping™ technology is unique of its kind and is exclusively used in Monocrom diode laser packages.
The number of assembled stacks can be set according to clients’ needs. The stacks can be connected separately or in a series for individual or set control.
SKU: Horizontal Diode Laser Arrays -
Single Emitters, Diode Lasers, Products
Single Emitters
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
SKU: Single Emitters -
Products, Diode Lasers, Direct Diode Lasers
Direct Diode Lasers
Direct diode lasers in a broad range of power levels and emission wavelengths designed for the most demanding industrial and medical applications that deliver up to 8 kW of power in continuous wave (CW).
Our diode laser stacks are mounted with Monocrom Solder-free laser bar Clamping™ technology, cooled efficiently, conductively or with real water macro channels for a low maintenance cost.
Our direct diode laser sources have matched the very demanding parameters of industrial applications such as heat-assisted roll-forming of ultra-high strength steel and bending of high strength steel in an industrial servo press for continuous die processing.
SKU: Direct Diode Lasers -
Fiber-coupled Lasers, Diode Lasers, Products
Fiber-coupled Lasers
Fiber-coupled Lasers
Highly efficient fiber coupled diode lasers with Monocrom Solder-free laser bar Clamping™ technology. The lack of a “smile” effect results in an optimum coupling efficiency to the optical fiber. We also provide wavelength stabilized fiber-coupled laser modules with a grating for wavelength locking. Having a low smile results in an exceptionally well-controlled feedback, which increases the locking efficiency and production repeatability.
For the most demanding applications of high brightness (radiance), we offer fiber-coupled high power diode laser systems capable of delivering 1 kW in power in continuous wave (CW) at a single wavelength.
SKU: Fiber-coupled Lasers -
Products, Diode-Pumped Solid-State Lasers
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
- Diode-pumped solid state laser for retina regeneration
- Wavelength: 527 nm
- Short laser pulses of 1.7 ms with up to 1 mJ
Suitable for:
- Material processing
- LIBS/RAMAR Spectroscopy
- LIDAR & WIND LIDAR
SKU: LQ-527-12 -
Products, Diode-Pumped Solid-State Lasers, Pumping Sources
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
- diode-pumped solid state green laser
- wavelength: 532 nm
- peak power at CW: up to 8W
- peak power at QCW: up to 15W
- beam quality: M²<1.4
- Power on demand
- Multi-path® technology
- Low cooling requirements
SKU: MP 532