Save Big on Warehouse Cleaning
Go to Daily Deals Section
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
Indicated for
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beam
Patented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengths
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
TEC Laser Drivers
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
Indicated for
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beam
Patented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengths
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
TEC Laser Drivers
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
Indicated for
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beam
Patented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengths
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
TEC Laser Drivers
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
Indicated for
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beam
Patented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengths
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
TEC Laser Drivers
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
Trending products
Go to Trending productsHeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
Indicated for
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beam
Patented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengths
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
TEC Laser Drivers
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
Digital Laser Drivers
Digital Laser Drivers
DAE-20050 is a compact and powerful laser diode driver. Current waveforms can be CW, modulated or pulsed up to 200A.
This driver includes a 32bit communication port. Commands allow the full control of the driver features (pulse generation, current level, temperature limits, pulse’s counter…) while keeping a great amount of information thanks to all the voltage, photodiode, temperatures, delayed trigger for syncs…).
DAE-20050 has been designed to support high power laser applications. An internal water circuit is bases for high demanding a Block diagram μC with an USB 2.0 signals available (current level, embedded in the applications
QCW Pumping Source PH3600-PH5400
QCW Pumping Source PH3600-PH5400
QCW Pumping Source pumping source operates in quasi continous wave (QCW) mode.
It delivers excellent gain uniformity and lensing performance.
It includes its own capacitor bank and driver so the high current pulses are generated in the module itself, reducing the losses and complexity of the electrical setup and easing the control and synchronization of different gain modules by means of software.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology. Exclusively used by Monocrom.
QCW Pumping Source PH450-PH1800
Reliable laser pumping units that operate in quasi continous wave (QCW).
A cylindrical symmetry design allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology.
No mechanical stress Our patented solder-free technology is used in our diode bars stacks. Thanks to it clamped bars expand and contract freely during the thermal cicles of the pulsed regime avoiding mechanical stress.
CW Pumping Source PH120 – PH300
CW Pumping Source PH120 – PH300
Pump heads for laser pumping, pumped with 120 W – 300 W at continuos wave (CW).
We offer all of them with Nd:YAG or Nd:YLF rod material.
The cylindrical symmetry of these pumping units allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system. The pumping laser diode bars are mounted using our patented solder-free clamping technology. Exclusively used by Monocrom.
HiEN Puls x5400-YLF
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
HiEN Puls x5400-YAG
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
Suitable for:
Popular Products
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
Indicated for
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beam
Patented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengths
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
TEC Laser Drivers
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
Digital Laser Drivers
Digital Laser Drivers
DAE-20050 is a compact and powerful laser diode driver. Current waveforms can be CW, modulated or pulsed up to 200A.
This driver includes a 32bit communication port. Commands allow the full control of the driver features (pulse generation, current level, temperature limits, pulse’s counter…) while keeping a great amount of information thanks to all the voltage, photodiode, temperatures, delayed trigger for syncs…).
DAE-20050 has been designed to support high power laser applications. An internal water circuit is bases for high demanding a Block diagram μC with an USB 2.0 signals available (current level, embedded in the applications
QCW Pumping Source PH3600-PH5400
QCW Pumping Source PH3600-PH5400
QCW Pumping Source pumping source operates in quasi continous wave (QCW) mode.
It delivers excellent gain uniformity and lensing performance.
It includes its own capacitor bank and driver so the high current pulses are generated in the module itself, reducing the losses and complexity of the electrical setup and easing the control and synchronization of different gain modules by means of software.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology. Exclusively used by Monocrom.
QCW Pumping Source PH450-PH1800
Reliable laser pumping units that operate in quasi continous wave (QCW).
A cylindrical symmetry design allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology.
No mechanical stress Our patented solder-free technology is used in our diode bars stacks. Thanks to it clamped bars expand and contract freely during the thermal cicles of the pulsed regime avoiding mechanical stress.
CW Pumping Source PH120 – PH300
CW Pumping Source PH120 – PH300
Pump heads for laser pumping, pumped with 120 W – 300 W at continuos wave (CW).
We offer all of them with Nd:YAG or Nd:YLF rod material.
The cylindrical symmetry of these pumping units allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system. The pumping laser diode bars are mounted using our patented solder-free clamping technology. Exclusively used by Monocrom.
HiEN Puls x5400-YLF
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
HiEN Puls x5400-YAG
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
Suitable for:
Laptops & Computers
HeatMe
Edge-emitting Solution for Industrial Heating
Direct diode solution allowing you controlling your Industrial heating application more accurately.
Controlling each and every part of the HeatMe module independently enabling much more flexibility with the targeted material.
This cost-effective solution is the next evolution in Heat treatment applications providing a scalable, flexible state of the art Heat source, which can be optimize to the necessity of your application.
CiOM Series
MONOCROM products are widely and successfully used for scientific applications in fundamental research (physics, chemistry, biology). We manufacture an extensive selection of diode-based solid state scientific lasers and related products for Spectroscopy, Interferometry and Optical Pumping applications, and can be used for others as well. These lasers fulfill particularly special and demanding technical specifications as required for scientific research.
LiOM Series
Introducing LiOM Series, S6, S9, S10 of very special, short pulse, fiber-coupled lasers for LiDAR applications. These lasers are designed for scanning, flash or iToF LiDAR applications, and can be used for others as well. All these modules are housed in the same enclosure and equipped with a “detachable” fiber. The driver electronics are located in the housing and the customer only has to provide the necessary DC voltage supply to operate the laser.
Single Emitters with fixed focus
Single Emitters: Laser diode modules based on single emitters.
Wavelengths between 375 nm – 1550 nm are available in a range of power that starts below 1mW and scales up to some watts.
We can add optics, mechanics and electronics to fit customer’s demands.
FLEX M-2000 X Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
FLEX M-2000 Technology
Indicated for
Liquid Fiber Diode Laser
Liquid Fiber Diode Laser
Ergonomic, light-weight and shock resistant hand piece:
– CLAMPING® Tech inside
– Improved cooling efficiency
– Extended useful life-time of the diode
– Flat Top beam profile with no divergence
– Visible aiming beam
Patented Technology of Liquid Fiber Optic delivery allows coupling of multi-kW diode laser into a compact system, with a light, ergonomic and drop test proof handpiece. As the high-powerdiode laser is remoted inside the machine, different hand pieces can be easily interchanged just disconnecting the fiber, to obtain different spot size or shape on the skin.
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
Encapsulated Diode Laser Stack with Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of same/different wavelengths
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
Encapsulated Diode Laser Stack without Tip
We supply Plug & Play Laser Diode modules with single or multiple
laser stacks (single or combined wavelengths). Encapsulated laser
stacks are easier to handle because the laser bar is kept into a sealed
case isolated from exterior. No clean room conditions are necessary
when manipulating these laser devices. A variety of tips and optics are
available.
Laser Diode Modules without
Laser Diode Modules with tip
Download Hair removal catalogue >>
***Customized optics available on request
D36: ø 36 mm – one stack per module
D49: ø 49 mm – one or two stacks of
same/different wavelengths
FLEX M-2000 Series
Introducing FLEX M-2000 Series, Fiber coupled solution in the 2 µm wavelength range (2000 nm laser) for Soft Tissue Surgery, Laser Lithotripsy and Endourology procedures.
In the new M-2000 the wavelength can be customized to successfully match the absorption peak of the targeted tissue. In this way, high ablation rate is assured, leading to better treatment results and shorter procedures.
This is suitable for Medical applications. This solution comes to the market to solve the wavelength limitations and as a cost-efficient alternative of others, commonly used lasers, such as solid-state Holmium:YAG and Thulium fiber lasers. While the wavelength emission of these lasers do not exactly match the water peak absorption around 2 µm, FLEX M-2000 offers the possibility to adjust the wavelength by design to perfectly match the water peak absorption, which results in a more efficient ablation.
Broad variety of optical fiber core diameters are offered to best match application needs.
TEC Laser Drivers
Analog Laser Drivers
DRV-CV-PS200 converts a power supply from PBA series by Cosel to a laser driver.
It is designed for laser pulses >5 ms.
Its configuration is far more compact than a conventional laser diode driver since it eliminates the need for large capacitors,
and associated electronics, increasing reliability and reducing cost.
DRV-CV-PS200 includes an internal security actuator which protects the laser diode against a possible power supply failure or a connection error.
Digital Laser Drivers
Digital Laser Drivers
DAE-20050 is a compact and powerful laser diode driver. Current waveforms can be CW, modulated or pulsed up to 200A.
This driver includes a 32bit communication port. Commands allow the full control of the driver features (pulse generation, current level, temperature limits, pulse’s counter…) while keeping a great amount of information thanks to all the voltage, photodiode, temperatures, delayed trigger for syncs…).
DAE-20050 has been designed to support high power laser applications. An internal water circuit is bases for high demanding a Block diagram μC with an USB 2.0 signals available (current level, embedded in the applications
QCW Pumping Source PH3600-PH5400
QCW Pumping Source PH3600-PH5400
QCW Pumping Source pumping source operates in quasi continous wave (QCW) mode.
It delivers excellent gain uniformity and lensing performance.
It includes its own capacitor bank and driver so the high current pulses are generated in the module itself, reducing the losses and complexity of the electrical setup and easing the control and synchronization of different gain modules by means of software.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology. Exclusively used by Monocrom.
QCW Pumping Source PH450-PH1800
Reliable laser pumping units that operate in quasi continous wave (QCW).
A cylindrical symmetry design allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system.
The pumping laser diode bars are mounted using our patented solder-free Clamping™ technology.
No mechanical stress Our patented solder-free technology is used in our diode bars stacks. Thanks to it clamped bars expand and contract freely during the thermal cicles of the pulsed regime avoiding mechanical stress.
CW Pumping Source PH120 – PH300
CW Pumping Source PH120 – PH300
Pump heads for laser pumping, pumped with 120 W – 300 W at continuos wave (CW).
We offer all of them with Nd:YAG or Nd:YLF rod material.
The cylindrical symmetry of these pumping units allows rotation of the pumping chamber giving flexibility during the production and optimization of a laser system. The pumping laser diode bars are mounted using our patented solder-free clamping technology. Exclusively used by Monocrom.
HiEN Puls x5400-YLF
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
HiEN Puls x5400-YAG
HiEN Puls x5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
Multi-Path® 532: Photocoagulation Laser
Multi-Path® 532: Photocoagulation Laser
Diode-pumped Solid-State Lasers: LQ-527-12
Diode-pumped Solid-State Lasers: LQ-527-12
Suitable for:
